To apply, you must check that the surface is clean, dry and free of dust. Works best on smooth surfaces.
1 - Remove the protective mask from the support paper. The vinyl graphic must be glued face down to the masking material. Discard the backing paper;
2 - Use a credit card or spatula to evenly smooth the vinyl from one side to the other on the chosen surface. Apply back and forth pressure with your smoothing tool to ensure strong adhesion;
3 - Remove the masking material starting in one corner and slowly removing until you reach the opposite corner;
4 - Finished. At this point, what should remain is just the vinyl graphic.
If you still have questions, watch the video below.
